Code quality with NDepend

In the ICT branch, quality tends to be overlooked. Plenty of products need regular updates and patches to fix problems in the existing code. Problem is that the software market has many software developers who don’t have a good grasp on the concept of quality, because they’re afraid that writing quality code will slow them down. Quality tends to be difficult, hard to understand. While writing programs is quite easy, since all you do is tell a computer what to do in a language the computer will understand.

One of the things that will always annoy me is when I see a project created by someone else, and it works great yet the code is an unreadable mess of Jibber-jabber. And often it’s caused because multiple people have added code to it, each and everyone in their own style and based on their own knowledge. And some of them are very good at their work, while others are bad. And even when a project started with some great code at first, all changes and updates just tend to make it too complex. And often it’s just because of deadlines or inexperience that code becomes bad. Or the lack of courage among developers to just throw away bad code and completely rewrite it using a better style and technique.

When I was developing in Delphi (which is still a hobby of mine) I had Peganza’s Pascal Analyzer available to help me tell about the status of the code. And although the Delphi compiler would just tell me about errors and warnings, those weren’t just enough to find the code quality. Because badly written code could still compile without warnings and errors. So I used the analyzer to tell me where I needed to re-factor the code to improve its quality.

So I wanted something similar to use with Visual Studio and C#. And although VS2012 offers its own analysis tools, they didn’t show me very much information. I discovered that I had to select a set of rules first, so I did. I chose the “Extended Design guidelines” and it gave me a few more warnings about my code. I have to avoid namespaces with just a few types, I need to validate the arguments of public methods. And I needed to mark a member as static. Too bad that the code I’ve used started as a generated project by Visual Studio itself. All I did was add a bit of meat to its bones, but the meat wasn’t the problem. The bones were…

So Microsoft’s own analysis complains about Microsoft’s own templates. I see. Yeah. Hum.

The next in line is Resharper, and Resharper doesn’t just analyse code, it also makes suggestions while typing and can even correct things on a simple mouse-click. Resharper is great when you want to re-factor your code and even analyses JavaScript code and other languages. It’s a great tool to fix things, but if you need to fix things, it means you’ve broken something first. And generally, when something is fixed you would prefer to have an immediate warning when your code starts to “smell” again, so you can do a rollback and tell the person responsible to do a better job. You don’t want to fix things at the end of a sprint when things start to smell bad. You want warnings sooner, when the project is built by one of the developers in your team. And basically, you want a report telling you about the current quality of the project, which you could show to clients and use to compliment your team on their good work. (Or to bash some heads when to do it badly.)

So, NDepend… It’s a bit expensive but for those who use a special build server to make new, daily builds based upon the latest code it is also a practical solution. It allows you to define your own set of rules based upon a query language that’s based upon LINQ. And it gave me plenty of warnings on my little project that are actually a bit more helpful than those VS2012 or Resharper gave me. It advised me to re-factor one complex method, which was indeed a bit too complex. It told me to make some classes ‘sealed’ since I’m not inheriting from them. Practical, since I wasn’t planning to inherit from these anyways. Some funny warning about a namespace without types, which isn’t very practical. Unfortunately, this default rule didn’t tell me which namespace it was or where it’s located so I have to search a bit. And a warning that I should avoid defining multiple types in a single source file. And indeed, I had declared three types in a single file, which isn’t good practice. Then again, this file was auto-generated too…

As it turns out, this simple project of mine didn’t have a lot of issues. But some large solutions that I’ve worked on do have plenty to report and the analyzer makes it very clear that maintaining solutions for over 7 years without regular quality check-ups on code do collect a lot of stink. I already knew some of those solutions were bad, but the analyzer made it even look horrible, almost unable to tell about all the smelly parts. It would take months to just fix those smelly parts and thus cleaning it up becomes a bit too expensive. You wouldn’t need a tool that tells you it smells, you’d need a tool that cleans it up. So for those big solutions, Resharper and common sense would be better.

I also decided to use it on a solution that I’ve worked upon myself, just curious about the amount of code smell in that solution, compared to some of the other large solutions I’ve seen. And I wasn’t surprised about the fact that it would have plenty of warnings. And it did. My small project only violated 13 rules while a large solution that I have had broken 86 rules. My solution broke 71 rules… So, almost as bad as the big ones, until I started to check the number of times each rule was violated. In my solution, I made perhaps a dozen violations for things that I consider important up to 3302 methods that could have had a lower visibility. Lowering visibility on those methods it mentioned isn’t that important to me, so those I won’t even fix. But the other big solutions I’ve analyzed had more than 100 violations per rule with only a few exceptions. Several rules had over a thousand violations with one rule having more than 12.000 violations. I would almost feel sorry for those who have to support that!

So, NDepend tells me my code stinks. Does it tell me even more? Yes, it does! It provides practical statistics about my code, displaying all namespaces and types but also the dependencies between the assemblies within a solution. And it shows the dead code within my solution. I had one dead method, that was actually part of a third-party component.

NDepend gets it power from the ability to create new rules, to group rules together and in the fact that it generates an HTML report that you could share among all developers, your managers and CEO and perhaps even send to customers who want to check if you’re making quality software. It can help you to improve your code but its main purpose is to tell you the quality of your code. It gives you a challenge. The challenge to rewrite your solution so it won’t have anything to warn you about. Once you’re at that point, NDepend could become part of your build process to make sure your code maintains such a high quality.

So, would you need NDepend in your tool collection? Is it worth the price you’d have to pay for it, or is it too expensive?

Well, for me as a single developer it’s practical since it challenges me to write code that creates no warnings. And this can be a real tough challenge when you’re working on complex solutions. But my personal budget is reasonable big, thus allowing me to make a few large expenses and probably even allows me to overpay a bit. It is an expensive product and I would recommend to first buy a Resharper license before considering buying NDepend. As long as Resharper tells you about code smell, you’re still in need of learning better design practices.

For a team of professional developers it is basically the same as for single developers. However, teams of developers will need reports telling them if the quality of the code is improving or not. You need to depend on the others in your team, and often you will lack the time to do a code review on the work of each team member. For teams of developers I would recommend to use NDepend if you, as a team, want to improve the code quality and are willing to check reports on the code quality with every new build. A license for your build server would be most practical in that case, especially when the build server will do regular (daily) builds automatically.

When your job is doing code reviews, you might want to use the build-in analyzer of VS2012 or Resharper but those are more meant to allow developers to fix code immediately. Code reviewing isn’t just meant to improve code, but is meant to improve developers. When you’re doing regular code reviews, NDepend would be very useful to do a lot of work for you. You would have to write your own rules and change several of the existing rules that NDepend provides, but it will help you to review the works of others.

If you’re a manager in an ICT department then reviewing code will probably be a bit complex. However, you would still need to know about the code quality and the quality of the team of developers. Here, too, a license for the build server would be practical to keep you informed about the health of your product and to take steps when your developers start adding smelly code. Especially when you need to outsource the code the use of code analysis becomes very important since you need to know if that far-away team is actually doing a good job. Too many outsourced projects have become extremely smelly, even though they seem to work just great. It would be a shame is a great start-up becomes a rotten egg simply because you forgot to check the code quality.

When you look at NDepend more closely, you will see how powerful this tool actually can be. You just have to keep in mind that this tool isn’t really meant to improve code, like Resharper and the VS2012 Analyzer does. It’s meant to improve the developer because it tells him if he’s improving or not. It tells teams of developers where their weaknesses are and will help to get rid of those weaknesses. And it will help companies to keep up a quality in the code that should equal the quality of their products.

Just don’t use it when your projects are already extremely smelly. You would need to clean up your code before you can clean up your developers…

Leave a comment

Your email address will not be published. Required fields are marked *